Experimental fast prototyper workstation at Universidad Católica de Pereira
Abstract
This paper shows a proposal for formative research on experimental rapid prototyping development and implementation of an experimental fast prototyping and their respective workstation which aims to improve the design process carried out in the workshops program industrial design UCP by enabling the generation of prototypes. This is an ongoing investigation applied type, which has been developing since 2008, then presents the methodology carried out by the research group, which consists in gathering relevant information, application and development of prototype model to the above information, validation of initial prototype, prototype development and pilot assembly and recognition of electrical or electronics needed for the implementation of the machine.
It raises also the most important results obtained during the investigation, as the designand development of a functional coordinate table, the mechanical assembly machine prototyping and several awards in the events I have attended the investigation group
Downloads
References
Ergonomía (2010). Unidad 5. Antropometría. Extraído desde wordpress.com, de http://ergonomia2010.wordpress.com/2010/05/06/unidad-5-antropometria/
Gibbons, A. (2006). Three dimensional printing at the advanced media studio. Extraído desde Connect, Information Technology at New York University, de http://www.nyu.edu/its/pubs/connect/fall06/gibbons_printing.html
Sasson, R. (2005). Puesto de trabajo. Extraído desde Monografías.com, de http://www.monografias.com/trabajos31/puesto-de-trabajo/puesto-de-trabajo.shtml
Slideshare (2009). Evaluación del puesto de trabajo. Disponible en http://www.slideshare.net/guestad5ecc/evaluacion-puesto-de-trabajo http://fragowb.wordpress.com/2008/06/01/estacion-de-trabajo-surf-chair/Tecnicas de planificación (2010). Diagrama de Gantt. Disponible en http://gerenciacultural-lpv.blogspot.com/2011/12/diagrama-de-gantt.html
